SMC-3E Toroidal Winding Machine
Model SMC-3E - Microprocessor Controlled Toroidal Winding Machine with RS-232 for Downloading from PC
Full programmability of all winding functions now available in a floor stand machine. Forget about lengthy set-up times. The famous SMC control now allows all winding functions to be programmed for ease of repeatable recall at any time. The SMC-3E is a medium sized floor stand machine for the winding of medium to large size toroidal coils. The ability to accept 4 types of winding heads along with 3 sizes of taping heads makes this machine the most versatile in its class. Core sizes from 3.0 inch (76.2mm) to 17.0 inch (431.3mm). Wire sizes from #38 awg (0.1mm) to #7 awg (3.66mm).
Specification / Capabilities
Maximum wire size: #7 AWG (3.66 mm)
Minimum wire size: #38 AWG (0.1 mm)
Maximum coil O.D.: 17.0″ (431.3 mm)
Minimum coil O.D.: 3.0″ (76.2 mm)
Minimum coil I.D.: 0.5″ (12.7 mm)
Maximum coil height: 7.0″ (177.6 mm)
Maximum coil weight: 80 lbd (36.4 kg)
Winding speeds: Variable depending on head
Wire spacing: Programmable variable
Segment Winding: Programmable
Progressive Winding: Programmable with controller
Deceleration Control: Programmable with controller
Acceleration Control: Programmable with controller
Shuttle Head Motor: 1 HP – 1750 RPM-DC
Core Rotation Motor: Hybrid step motor
Power requirement: 120 Volt or 220 volt (50-60 cycles)
Crated dimensions: 48″ x 48″ x 60″ (121.4 x 121.4 x 151.8 cm)
Crated weight: 750 lbs (340 kg)
Principal and Optional Features
- Separate speed controls for loading and winding
- Programmable stepper motor driven core rotation in either direction with minimum backlash
- Programmable wire spacing, from coarse to fine micro-step resolution
- Electronic linear pick-up for loading (feet or meters)
- Tape head controls
- Solid-state microprocessor count controller - total of 99 programmable presets - LED readout - built-in fiber optic turns sensor-program storage- production batch counter - utmost accuracy, stability and reliability
- RS-232 with interface software
- Quick change winding and taping heads
- Automatic core index function
- Push button, on-off footswitch or variable footpedal operation
- Optional SMC programming software to pre-calculate and download all winding parameters from your PC to the machine