JV250 Toroidal Winding Machine
JV250 - 2 Preset Counter Controlled Toroidal Winding Machine Our Low Cost Winding Machine
JV250 – 2 Preset Counter Controlled Toroidal Winding Machine Our Low Cost Winding Machine
By eliminating some options not needed for the winding of certain applications, Jovil has developed a low-cost machine while retaining the same quality construction as in our microprocessor controlled JV100BE-2
The two main features eliminated are:
1. The Microprocessor
2. The ability to rotate the core in the CW direction.
The JV250 is available with one of two different counters:
1. The JV57 a dual preset counter with no deceleration. (Standard)
2. The LGM a four preset counter with deceleration. (Optional)
The JV250 base will accept all winding heads, core rotators, taping heads and shuttles currently used on the model JV100BE.
Specification / Capabilities
Maximum wire size: #16 awg (1.4mm)
Minimum wire size: #46 awg (0.05mm)
Maximum coil OD: 4.000″ (101.6mm)
Minimum coil OD: 0.187″ (4.7mm)
Minimum coil ID: 0.040″ (1.0mm)
Maximum coil HT: 2.000″ (50.8mm)
Winding speeds: Variable to 2000 tpm
Wire spacing: Automatic variable
Deceleration control: Only with LGM type counter
Motor: 1/2 HP – 7600 RPM-DC – with dynamic braking
Power requirement: 110-120V, 50-60 cycles (220V optional)
Crated dimensions: 37″ x 37″ x 42″ (94 x 94 107cm)
Crated weight: 200 lbs (90 kg)
Principal and Optional Features
- Separate speed controls for loading and winding
- Power driven core rotation with automatic core reversing - infinitely variable
- Variable wire spacing control
- Floating drive for centering core during winding - single knob control
- Electronic linear pick-up for loading (feet or meters)
- Controls for operating taping head
- Quick change winding heads and core rotators
- Push button and/or footswitch control
- Positive core rotation with minimum backlash